Home / All / Solder/Welding Fume Extractor /

On-torch and Fume Guns Welding Fume Extractor

On-torch and Fume Guns Welding Fume Extractor

On-torch and Fume Guns Welding Fume Extractor
CategoriesSolder/Welding Fume Extractor
BrandACMAN
ModelApollo-1000
ApplicationOn-torch/solder/welding Fume Extraction
Filter MaterialPolyester+Fiber Material
Cleaning ModePulse jet compressed air backflow
Compressed Air Source0.4-0.6MP
Jet ControlTimer/pulse controller
Power Supply380V/50HZ or Customize
FOB portSHANGHAI/NINGBO
Terms of PaymentT/T
Update TimeMar 29,2024
Detail Information
On-torch and Fume Guns Welding Fume Extraction
Why Mobile Fume Extractor is Superior to Central Ventilation in Welding Process?
In recent years, a special type of welding fume extraction systems has become an ever more prominent factor: Filtering of welding fumes and return of the filtered air into the workshop area.

This shows that the issue of environmental consideration has turned for the better for all concerned. There never has been any doubt about the existence of harmful fumes at welding sites. However, type of fumes depends on the particular welding process and welding technique. One can generally differentiate between gases and fumes. The fumes could also be referred to as fine dust. Investigating them under the microscope, we are able to see particles of a size that will pass through the respiratory tract deep into our lungs. The size of these particles is a small as 0.001 mm or even less.


Ventilation is the general approach to improve the conditions at the relevant work positions. Generally, this is affected by continuously exchanging the air in the workshop, i.e. the total air volume is exchanged at a high rate. This method will reduce the concentration of harmful particles within the hall to a great extent, however, it will improve the air within the breathing range of the individual welder to a negligible portion only.

This also applies to overhead suction systems, i.e. the installation of large extraction hoods overhead of welding places. Here again the heavily polluted air passes upwards through the breathing range of the welder. Extraction and/or filtering take place overhead and outside the range of the welder. A point-attack extraction of the welding fumes right at their place of origin is far more effective than room ventilation or overhead extraction. Both capital investments for on-the-spot fume extraction as well as the operating costs for such systems are far below those of the previous conventional solutions.

Environmental and work protection measures are prerequisite for the successful application of advanced welding technologies, aside from the optimization of such welding processes. In view of increased awareness of the problems involved and in compliance with pertinent legal directives, the danger potential for personnel and environment must be considered at an early stage and it must be minimized using appropriate technical solutions.

Functional Principle of Apollo Fume Extractors
The filter unit APOLLO is used mainly for extracting welding fumes on the spot. One or two flexible extraction hoses or other specific conduits are provided for the specific type of application.

Operational limits:
Welding fumes containing oil mist, aluminum dust, grinding dust, suction of metallic dusts, gases, water, etc. (If there is any doubt about the application, please contact the manufacturer.)

The polluted air is extracted via the suction hood (or a specific suction head) and directed into the suction arm (or suction hose) and into the filter unit. Here, the particles are collected on the surface of the filter cartridge and medium efficiency filters. The clean air passes the fan and returns into the room via the exhaust grid).

About the Filters
Apollo portable fume extractor contain TWO STAGE FILTRATION PART:
Filter one: H10 High Efficiency Pleated Cartridge Filters. 
Filter two:  F9 Medium Efficiency Filters
Technical Data
Model
Airflow   m3/h
Power    Kw
Noise   db
Size   mm
Weight  Kg

Apollo-1000

1000

0.75

<60

600*650*1000

65

Apollo-1500

1500

1.1

<62

700*700*1100

75

Apollo-2000

2000

2.2

<65

700*700*1200

95

Create a Fume-free Workshop
Contact Us
Wechat
+86 19550289881
Info@dustscrubber.com
+86 18768123711
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Love discounts? Subscribe to newsletter!

subscription