Dust Extraction Systems for Air Pollution Control---Healthy Manufacture
Categories
- Industrial Pulse Jet Dust Collector
- Cyclone Dust Collector
- Wet Scrubber
- Solder/Welding Fume Extractor
- Pharmaceutical Dust Collector
- Sandblasting Dust Collector
- Metalworking Dust Collection System
- Laser Fume Extractor
- PE Sinter-plated Filter and Equipment
- Dust Collection Auxiliary Equipment
- Central Vacuum Cleaning System/Unit
- Industrial Centrifugal Fan
- Sand Blasting Machine
- Bag In Bag Out Filter System
- Power Coating Machine/Powder Spraying System
Wet Scrubber Dust Collector, Watery Scrubber Dust Remover
Categories | Wet Scrubber |
---|---|
Brand | ACMAN |
Material | SUS 304/Q235 |
Update Time | Dec 5,2024 |
Detail Information
Wet Scrubber Collector Detail:
• Features:
1:High dust removing efficiency through hydraulic force
2:Automatic water feeding device, easy in maintenance
3:Good dust removing effect for sticky and hydrophilic dust particles
4:Low running resistance, low power consumption
• Operation principle:
During operation, dust air passes through arc-shaped slot with high flow speed after it enters the purifying tank. Air stream in the slot turns sharply and blends forcefully with water, forming a water curtain at the slot exit that facilitates full contact between dust and water and enables dust to dissolve into water. Purified air is discharged out from water-retaining plate after moisture removed. By recycling water in the tank, Water consumption is therefore minimal, except for loss from evaporation. Water lost is replenished by automatic water refilling device to maintain water level. Sludge on the dust remover shall be cleaned regularly.
• Applicable:
It is highly effective in treating sticky, high temperature, toxic and harmful gases. It's widely used in pharmaceutical, metallurgy, chemical and power industries.Wet scrubber for flammable dust(metal grinding, polishing, buffing,brazing)
water scrubbers for Thermal exhaust gas/hot steam vapor/hot gas dust scrubber for hygroscopic dust(sugar rotary dryer,thermal-spray application Watery dust remover for poisonous gas absorption, acid and alkali neutralization air scrubber for pharmaceutical sensitization powder: penicillin,Pill Encapsulation
gas scrubber for odor absorption(VOCS treatments)
• Product Overview:
ZH-# wet scrubbers are devices that remove particulate pollutants from a workplace with Spark or from other moisture dust emit conditions, or from sensitizer-manufacture equipment.In the wet scrubber, the raw gas is brought into the wet collector, by forcing it through the liquid, so as to remove the pollutants. Generally the scrubber liquid is water, and some additive also can be addicted in order to neutralize, oxidation, reduction.In general, dust particles removal efficiencies requires that one of them be easily collected in solvent (i.e. that the gases are very soluble in the liquid or that the particles are large and readily captured)ZH-# wet dust collectors are flexible design for various range of process conditions with minimal operate requirements. The centrifugal blower has high static pressure and multistep air capacity choices. Self-water make-up makes operation easily.
1:Upper fan setting
2:water tank: self-water replenishing
3:Apply for Hydraulic and sticky dust
4:High dust removing efficiency
5:Low running resistance
6:low power consumption
7:Body material: Sus 304/Q235
8: ability to handle high temperature and moisture dust.
9:can remove both gases and particulate matter.
10:Wet scrubbers can neutralize corrosive gases.
SPECIFICATION PARAMETER
Model | Air Flow(m3/h) | Resistance(Pa) | High | Wide | Deep | Weight(kg) |
ZH-2 | 1600-2900 | ~80 | 950 | 1110 | 2357 | 1100 |
ZH-4 | 2900-4000 | ~80 | 1100 | 1300 | 2653 | 1320 |
ZH-6 | 4000-6400 | ~80 | 1330 | 1630 | 3242 | 1480 |
ZH-8 | 6400-8500 | ~80 | 1530 | 1830 | 3242 | 1990 |
ZH-10 | 8500-10580 | ~80 | 1730 | 2030 | 3432 | 2460 |
ZH-15 | 12000-17000 | 80~120 | 2075 | 2903 | 3930 | 3680 |
ZH-20 | 17000-24000 | 80~120 | 2225 | 2903 | 4238 | 4200 |
ZH-30 | 30000 | 80~120 | 2346 | 3356 | 4700 | 6020 |
ZH-50 | 50000 | 80~120 | 2634 | 4378 | 5785 | 7000 |
OPERATION PRINCIPLE
PRODUCT FAQ:
Q: What should provide when choosing suitable dust collectors?
A: Process summary sheet should be provided, for we need to know the dust collection summary for example: dust category (what? Flammable? Corrosive? Explosive? Temperature? Density?)
Q: How to confirm the airflow/air capacity and the pressure?
A: Mostly, it depends on the dust suction hoods, then can calculate the airflow; our dust extractor provide ~1000Pa pressure to your use, so the duct system pressure should known first.
Q: The water consumption?
A: The water tank contain 1-ton water for recycling (depend on the size, ZH-4 as an example), Water consumption is minimal, except for loss from evaporation.
Q: The dust collection unit’s power supply?
A: Every country have different industrial power supplies, we could OEM the blower for your needs.
Q: When we should change the recycling water?
A: It depend on the usage and process, normally, 3-6 months.
Contact Email: Info@dustscrubber.com
Please send your message to us
- Tel
- *Title
- *Content
Love discounts? Subscribe to newsletter!
subscription
Send Inquiry
Please send your message to us
- Tel
- *Title
- *Content
Company
Categories
- Industrial Pulse Jet Dust Collector
- Cyclone Dust Collector
- Wet Scrubber
- Solder/Welding Fume Extractor
- Pharmaceutical Dust Collector
- Sandblasting Dust Collector
- Metalworking Dust Collection System
- Laser Fume Extractor
- PE Sinter-plated Filter and Equipment
- Dust Collection Auxiliary Equipment
- Central Vacuum Cleaning System/Unit
- Industrial Centrifugal Fan
- Sand Blasting Machine
- Bag In Bag Out Filter System
- Power Coating Machine/Powder Spraying System
Mobile Web